An electric lawnmower clutch gets energy from the mower’s engine and transfers it to the mower blade. An electric clutch also performs the function of a brake to stop the blades when the PTO gets turned off. This type of clutch prevents the mower from moving after the driver disengages the mower clutch.Click to see full answer. In this manner, where is the clutch on a riding lawn mower?Usually, this clutch is attached to the underside of the engine and is shaped as a small bell housing. From this position, it controls the mower blades. You will also be able to identify the clutch if you follow the mower blades.Furthermore, how do you check a lawn mower clutch? Pull off the main power wire that goes to the PTO clutch assembly. This is located on the clutch side. Turn the wire jack toward you, but pull yourself back away from the deck as far as possible. With the battery connected and engine turned off, place the negative alligator lead of a test light to a ground source. Also question is, why won’t my mower blades engage? Most Frequent Causes for Lawn mower blades won’t engage The PTO (Power Take Off) clutch provides a means of manually disconnecting the engine from the blades. If the PTO clutch is not getting power, if the clutch solenoid is defective, or if the clutch is worn out, the lawn mower blades will not engage.How do you check a clutch switch?Use a multimeter to diagnose the clutch switch and circuit. Remove the switch’s plug and test it for battery voltage with the meter’s voltmeter. Set the meter to measure ohms and check the switch for continuity. On a good switch, the meter should display infinity with the switch open and the pedal out, not depressed.

ncG1vNJzZmivp6x7pLHLnpmroaSesrSu1LOxZ5ufonuotI6hprBllKSytHnAZpqlraSYtW7DzquiZqeeYq5uuMCwpWaln6yys3mRaA%3D%3D